Menu

Smart Factories FEATURE NEWS

Installed Wireless IoT Devices in Industrial Automation at More Than 21 Million

By Ken Briodagh January 24, 2019

According to a new research report from the M2M/IoT analyst firm Berg Insight, annual shipments of wireless devices for industrial automation applications reached 4.6 million units worldwide in 2018, accounting for approximately 6 percent of all new connected nodes.

Growing at a compound annual growth rate (CAGR) of 16.3 percent, annual shipments are expected to reach 9.9 million in 2023. The installed base of wireless IoT devices in industrial automation reached at the same time 21.3 million in 2018. While wired networking solutions are still predominantly used for industrial communications between sensors, controllers and systems, wireless solutions have gained a strong foothold in a number of applications. Wireless solutions are used for wire replacement in parts of the plant that are hard to reach or uneconomical to connect through wired installations. In factory automation, wireless solutions are widely used to control cranes and automated guided vehicles (AGVs) in material handling applications. In process automation, wireless technologies are increasingly used to connect instruments, enabling plant operators to monitor and optimize processes in hazardous areas, while also ensuring worker safety.

Major providers of wired industrial network equipment also offer wireless solutions to enable customers to monitor and control devices wirelessly in parts of the plant that are normally not connected to the control room due to accessibility or wiring costs. These include Siemens, Cisco, Belden, Moxa and Phoenix Contact, which all offer comprehensive portfolios of industrial wireless devices such as routers, gateways and wireless access points along their wired solutions. Industrial wireless solutions are also offered by many mid and small-sized companies, which often specialise in specific product categories. Examples include Acksys, Advantech, Beijer Electronics Group, FreeWave Technologies, GE’s industrial communications group GE MDS, HMS Networks, Red Lion Controls and Sierra Wireless. Wireless I/O and field devices are provided by many major industrial automation vendors including Emerson, Yokogawa, Honeywell, ABB, Schneider Electric, Siemens, Endress+Hauser and Pepperl+Fuchs.

“Robust connectivity is critical to support industrial IoT use cases surrounding predictive maintenance and digital twins”, said Fredrik Stålbrand, IoT Analyst, Berg Insight. He adds that installation and maintenance of wireless solutions are more flexible and economical compared to wired technologies, enabling reconfigurable manufacturing system design. Although reliability and security remain a challenge, Wi-Fi has emerged as the most widely used wireless technology in industrial environments largely due to the wide availability of compatible hardware. There is also a growing trend among large industrial companies to deploy private 4G LTE networks instead of using Wi-Fi and even wired solutions. “The introduction of 5G cellular technologies broadens the addressable market for wireless communications even further as it allows for deployments in situations where requirements related to bandwidth, latency and capacity cannot be fulfilled today.”


The IoT Evolution Expo, and collocated events, IoT Evolution Health, LPWAN Expo, The Smart City Event, and IIoT Conference, will take place Jan. 29 to Feb 1 in Ft. Lauderdale, Florida. Visit IoTEvolutionExpo.com to register now.

Edited by Ken Briodagh

Editorial Director

SHARE THIS ARTICLE
Related Articles

The Impact of Industrial IoT on Manufacturing OEMs

By: Special Guest    5/14/2019

A recent study by Emory University and Presenso sought to understand the perspective of plant-level employees on the topic of Industry 4.0.

Read More

IoT Time Podcast S4 Ep 18: Saurabh Mishra & David Giapponi at SASGF

By: Ken Briodagh    5/10/2019

In this episode of IoT Time Podcast, Ken Briodagh sits down at SAS Global Forum with Saurabh Mishra of SAS, and David Giapponi of Ulbrich, to talk abo…

Read More

How a Beer Company Adapted IoT and AI To Save Thousands

By: Shrey Fadia    5/6/2019

Every industry can take advantage of the Internet of Things (IoT) and Artificial Intelligence (AI), including wine, spirits and beer companies.

Read More

How to Manage Risk in a Smart Factory

By: Special Guest    5/6/2019

Smart factories are popping up all over the landscape. These IoT-enabled facilities increase worker safety and improve efficiency while reducing waste…

Read More

Mobile Industrial Robots Launches AI-Enabled Robot to Transport Loads and Pallets

By: Ken Briodagh    4/9/2019

New autonomous mobile robot can lift a ton of weight, now customers can add AI tools to all robots

Read More